View occupational profile

Search the OaSIS

Public works and maintenance labourers

OaSIS code 75212.00

Public works and maintenance labourers perform a variety of labouring activities to maintain sidewalks, streets, roads and similar areas.

Overview

Also known as

  • Helper - garbage collection
  • Municipal labourer
  • Parking meter collector
  • Public works labourer
  • Road maintenance worker
  • Sewer maintenance worker
  • Sidewalk cleaner

Main duties

This group performs some or all of the following duties:

  • Clean and maintain sidewalks, streets, roads and public grounds of municipality and other areas, working as member of crew
  • Sweep debris and remove snow from streets, sidewalks, building grounds and other areas, and load snow and debris into carts or trucks
  • Shovel cement and other materials into cement mixers, spread concrete and asphalt on road surfaces using shovels, rakes and hand tampers, and perform other activities to assist in maintenance and repair of roads
  • Spread sand or salt on sidewalks for snow and ice control
  • Dig ditches and trenches using shovels and other hand tools
  • Operate jackhammers and drills to break up pavement
  • Load and unload trucks with supplies and equipment
  • Collect money from coin boxes of parking meters along established route
  • Collect and load refuse on garbage trucks
  • Assist equipment operators to secure attachments to equipment or trucks
  • Assist in routine maintenance and repair of equipment
  • Assist skilled tradespersons such as carpenters, plumbers and mechanics
  • May operate mobile sidewalk-cleaning equipment.

Additional information

  • Progression to supervisory positions or to public works maintenance equipment operator positions is possible with experience.

Similar occupations classified elsewhere

Exclusions:

  • Public works maintenance equipment operators and related workers (74205)

NOC hierarchy breakdown

NOC version

NOC 2021 Version 1.0

Broad occupational category

7 – Trades, transport and equipment operators and related occupations

TEER

5 – Occupations usually require short-term work demonstration and no formal education

Major group

75 – Helpers and labourers and other transport drivers, operators and labourers

Sub-major group

752 – Transport drivers, operators and labourers

Minor group

7521 – Water and rail transport operators and labourers and related occupations

Unit group

75212 – Public works and maintenance labourers

Occupational profile

75212.00 – Public works and maintenance labourers

Work characteristics

Work characteristics gathers the various components describing the work environment of each occupation, such as employers, work activities, and the work context. Each category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of complexity (for Work Activities) or other measurement dimensions (for Work Context), and secondly, in alphabetical order. The whole list of descriptors and their ratings can be expanded at the bottom of each page.

Work Activities

Proficiency or complexity level
Performing General Physical Activities
4 - High Level
Controlling Machines and Processes
3 - Moderate Level
Handling and Moving Objects
3 - Moderate Level
Operating Vehicles, Mechanized Devices, or Equipment
3 - Moderate Level
Communicating with Persons Outside Organization
2 - Low Level

Work Context

Structural Job Characteristics

Structured versus Unstructured Work
Degree of freedom to determine tasks and priorities
1 - Very low amount of freedom
Work Week Duration
Worked hours in a typical week
2 - Between 35 to 40 hours

Physical Work Environment

Physical Proximity
Physical distance from others
3 - Somewhat close (e.g. share office)

Physical Demands

Sitting
Duration
1 - Very little time
Standing
Duration
4 - More than half the time
Bending or Twisting the Body
Duration
3 - About half the time

Interpersonal Relations

Contact with Others
Frequency
4 - Every day, a few times per day
Duration
4 - More than half the time
Work with Work Group or Team
Importance
3 - Important
Frequency
4 - Every day, a few times per day

Workplaces/employers

  • Private contractors under contract to governments
  • Public works departments in all levels of government

Skills and abilities

This section displays the various competencies required for an occupation. Each category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of proficiency (for Skills and Abilities) or importance (for Personal Attributes) and secondly, in alphabetical order. The whole list of descriptors and their ratings can be expanded at the bottom of each page.

Abilities

Proficiency or complexity level
Dynamic Strength
4 - High Level
Stamina
4 - High Level
Static Strength
4 - High Level
Trunk Strength
4 - High Level
Auditory Attention
3 - Moderate Level

Skills

Proficiency or complexity level
Equipment and Tool Selection
2 - Low Level
Management of Material Resources
2 - Low Level
Operation and Control
2 - Low Level
Operation Monitoring of Machinery and Equipment
2 - Low Level
Preventative Maintenance
2 - Low Level

Personal Attributes

Importance
Adaptability
3 - Important
Collaboration
3 - Important
Active Learning
2 - Somewhat important
Attention to Detail
2 - Somewhat important
Concern for Others
2 - Somewhat important

Interests

The OaSIS uses the Holland Codes to describe the work-related interests. According to the Holland model, people work best in work environments that match their preferences, which means that people and work environments can be matched for a best fit. Occupational environments in Holland’s theory are described according to a combination of main interests and the activities they represent. There are six interests in the Holland typology: Realistic, Investigative, Artistic, Social, Enterprising and Conventional. All occupations in OaSIS have up to three interests assigned to them.

Interests

Preferences for work environments and outcomes.

Interests profile: RC

Realistic (R)

Realistic occupations are characterized by the dominance of activities that entail the explicit, ordered or systematic manipulation of objects, tools, machines and animals. Many of these occupations do not involve a lot of paperwork or working closely with others.

Conventional (C)

Conventional occupations are characterized by the dominance of activities that entail following sets of procedures and routines. These activities may include systematic manipulation of data, such as keeping records, filing materials, reproducing materials, organizing written and numerical data according to a prescribed plan, and operating business and data processing. They often require following a clear line of authority and usually involve working with data and details more than with ideas.

Employment requirements

Employment requirements includes the education, training, certifications and the knowledge required to work in each occupation. The Knowledge category displays up to 10 descriptors in descending order based, firstly, on their attributed ratings by the level of proficiency, and secondly, in alphabetical order. The whole list of Knowledge descriptors and their ratings can be expanded at the bottom of each page.

Education, certification and licensing

  • Several weeks of on-the-job training are provided.

Knowledge

Knowledge level
Public Safety and Security
2 - Intermediate Level
Building and Construction
1 - Basic Level
Languages
1 - Basic Level
Manufacturing, Processing and Production
1 - Basic Level
Mathematics
1 - Basic Level

Skills for success

 
Skills for Success Model
 
Skills for Success are skills that help you in a quickly changing world. Everyone benefits from having these skills. They can help you to get a job, progress at your current job or even change jobs. The skills also help you become an active member of your community and succeed in learning.
 
 
Linkages Between ESDC Skills Models and Frameworks
 
ESDC makes available a dictionary of over 300 terms (or descriptors) and definitions, known as the Skills and Competencies Taxonomy (SCT). Descriptor information from the Taxonomy is used in the Occupational and Skills Information System (OaSIS).
 
While there is general commonality of meaning between the descriptors in the SCT and the Skills for Success model, there are some differences in their definitions due to their distinct purposes. The Skills for Success Model [9 broadly defined skills] identifies the skills that are universally applicable. The SCT displays specific skills and competency requirements for 900 occupations. Users of the Skills for Success Model and Essential Skills content may find competency information from the Taxonomy and the OaSIS to be complementary.
 
Stay tuned to this section for more information and updates regarding linkages between the Skills for Success model and the OaSIS.

O*NET in-it

This page includes information from the O*NET 27.2 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. Employment and Social Development Canada has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.

Date modified: